France
Swedish
Spanish
Norwegian
Dutch
German
Arabic
Poland
Italy
Portugal
Denmark
Bodai-Global
BoDai-Global
CloverFour EQ SilverIntroducing CloverWeights from BoDai-Global. Developed for the Star Adventurer, EQ3-2 and (H)EQ5, these travel counterweights provide up to 2.5 kilos mass, for up to 80mm refractors for imagers and observers on the move. Why use up your baggage allowance with dead weight? Just buy some cans when you get to your destination, and use them. Save the cost of a Cloverweight in as little as one return air flight! They can also be made heavier using a sand/water so a 330ml can goes from circa 340grams each to 500grams each, and a 440ml from circa 460grams to a whopping 860grams! We found it easier to pull off the ring pull, and fold back or remove the tab, before filling and covering with tape. There are 3 and 4 can models for smaller and larger mounts. The Clover Three is for 12mm shafts, and the CloverFour is for larger EQ mount with the 20mm shaft. Weights are circa 135 grams and 168 grams respectively. These have been balance tested on Skywatcher, Celestron and iOptron moun...
BoDai-Global
Polarite with Right angle finderThe Brand new Polarite from Bodai-Global! This is such a simple idea developed from our time with the astronomy group HantsAstro. Ever tired of having to kneel awkwardly under the mount and fiddling to try and get polar alignment? Then this is the perfect solution, no more neck twisting or wet knees! The adapter for the right angled finder adapter fits your polarscope, and the right angle DSLR 1x-2x Zoom slider slides on, so you can clearly see the reticule and adjust for perfect polar alignment in total comfort. The finder also comes with DSLR adapters include so you can use it on your DSLR Camera too! Tested with all EQ mounts including Sky-watcher, Celestron, Meade/Bresser and iOptron. Special adapter for the iOptron ZEQ25 please enquire - 023 9257 0283.
HEQ5-EQ6 Rail kits\Rowan Belt kits
AZEQ6GT Latitude LockIntroducing BoDai-Global's new AZEQ6GT Latitude-Lock. Using a finer thread than the stock adjuster, this simple solution offers the perfect way to solve the coarse polar alignment of this mount. As a push-pull arrangement, and used as a differential thread, it provides a 4-fold improvement in accuracy, which improves the tracking ability of your mount. It also cures the rocking base that afflicts some of these mounts, and also provides storage for the ALT/AZ Safety Bolt. Designed and made in UK in polished Stainless Steel, with Red anodised alloy knob. Grey only in stock at present
